There are stretches of northern ocean where the water freezes into endless sheets of ice.
Over time, the sailors learned to avoid these parts of the ocean, not because of the cold, but because of what waits for them below the surface.
Iceveil does not hunt the creatures of the sea… fish pass beneath them untouched, and even the great predators of the north are ignored. They have no interest in them. They wait for something else. They wait for ships.
Iceveil drifts just beneath the frozen surface, their back blending seamlessly with the ice above them. Their camouflage makes them impossible to see. Nothing would be suspected.
Only stillness exists.
When a ship passes too close to the frozen water, Iceveil rises with it…. silent, unseen, matching its movement from below. Sometimes the first sign is a sound, a faint knock against the hull, too soft to mean anything at first… and then another, closer. The water remains calm. The ice does not break. And yet, something is there.
By the time the sailors realize they are not alone, it is already too late. Iceveil does not need to shatter the ship. They only need to take one. A person at the edge, a hand dipping into the water, a moment of curiosity, is all it takes.
The ocean barely moves when they strike. A small disturbance exists in the moment, and then nothing. There is no struggle, no sound, but only the slow drift of broken ice, and a ship that continues on, lighter than it was before.
Iceveil then returns to settle beneath the frozen surface, their form once again indistinguishable from the ice above. They wait, because the sea always brings more.
This tail is part of a limited pre-order release.
Estimated production time is 12–16 weeks before shipment.
Each piece is produced in small runs to maintain consistency, detail, and quality from start to finish.
Our swimmable fabric tails are constructed from 1 mm four-way stretch scuba knit fabric, featuring high-definition sublimation printed designs for vibrant color and realistic scale detail. Each Darkwater Fins tail features our original fluke design and includes a durable internal vinyl monofin casing. Monofins slide easily into the casing and are secured with internal velcro closures, allowing the fluke to move naturally and realistically through the water. All Darkwater Fins fabric tails are made to your custom measurements, ensuring a tailored and secure fit.
These tails are designed to accommodate a variety of monofins within the dimensions listed below. We recommend monofins with short, stiff blades such as the FINIS Shooter Monofin or FINIS Foil Monofin for best performance.
MONONFIN IS NOT INCLUDED
1 mm four-way stretch scuba knit tail skin
Custom fit based on your measurements
Elastic waistband for secure comfort
Invisible 30-inch color-matched side zipper
High definition sublimation printed design
Durable internal vinyl monofin casing with velcro closures
Original Darkwater Fins fluke design
Total Length: 36.5 inches
Width at Widest Point: 32 inches
This product is designed to be used with a monofin by proficient swimmers only. The quality and stiffness of your monofin will significantly affect swimming performance.
Always follow safe swimming practices:
Never swim alone
Avoid water deeper or more hazardous than your skill level
Swim in lifeguarded areas
Improper use of this product may result in injury or death.
If you’re ordering from outside the U.S., your country may apply customs duties or import fees once the package arrives. These charges are not included at checkout.
Because of the size of these pieces, UPS is generally the most reliable options for international delivery.
Every Darkwater tail is carefully handmade and inspected before shipment. If you experience a manufacturing defect or issue related to craftsmanship, please contact us and we will gladly work with you to find a solution.
Customer satisfaction and the quality of our tails are extremely important to us.
These tails are produced as part of a set release and are not offered with custom alterations.
Each one is handmade, and slight variation is part of the process.
There are stretches of northern ocean where the water freezes into endless sheets of ice.
Over time, the sailors learned to avoid these parts of the ocean, not because of the cold, but because of what waits for them below the surface.
Iceveil does not hunt the creatures of the sea… fish pass beneath them untouched, and even the great predators of the north are ignored. They have no interest in them. They wait for something else. They wait for ships.
Iceveil drifts just beneath the frozen surface, their back blending seamlessly with the ice above them. Their camouflage makes them impossible to see. Nothing would be suspected.
Only stillness exists.
When a ship passes too close to the frozen water, Iceveil rises with it…. silent, unseen, matching its movement from below. Sometimes the first sign is a sound, a faint knock against the hull, too soft to mean anything at first… and then another, closer. The water remains calm. The ice does not break. And yet, something is there.
By the time the sailors realize they are not alone, it is already too late. Iceveil does not need to shatter the ship. They only need to take one. A person at the edge, a hand dipping into the water, a moment of curiosity, is all it takes.
The ocean barely moves when they strike. A small disturbance exists in the moment, and then nothing. There is no struggle, no sound, but only the slow drift of broken ice, and a ship that continues on, lighter than it was before.
Iceveil then returns to settle beneath the frozen surface, their form once again indistinguishable from the ice above. They wait, because the sea always brings more.
This tail is part of a limited pre-order release.
Estimated production time is 12–16 weeks before shipment.
Each piece is produced in small runs to maintain consistency, detail, and quality from start to finish.
Our swimmable fabric tails are constructed from 1 mm four-way stretch scuba knit fabric, featuring high-definition sublimation printed designs for vibrant color and realistic scale detail. Each Darkwater Fins tail features our original fluke design and includes a durable internal vinyl monofin casing. Monofins slide easily into the casing and are secured with internal velcro closures, allowing the fluke to move naturally and realistically through the water. All Darkwater Fins fabric tails are made to your custom measurements, ensuring a tailored and secure fit.
These tails are designed to accommodate a variety of monofins within the dimensions listed below. We recommend monofins with short, stiff blades such as the FINIS Shooter Monofin or FINIS Foil Monofin for best performance.
MONONFIN IS NOT INCLUDED
1 mm four-way stretch scuba knit tail skin
Custom fit based on your measurements
Elastic waistband for secure comfort
Invisible 30-inch color-matched side zipper
High definition sublimation printed design
Durable internal vinyl monofin casing with velcro closures
Original Darkwater Fins fluke design
Total Length: 36.5 inches
Width at Widest Point: 32 inches
This product is designed to be used with a monofin by proficient swimmers only. The quality and stiffness of your monofin will significantly affect swimming performance.
Always follow safe swimming practices:
Never swim alone
Avoid water deeper or more hazardous than your skill level
Swim in lifeguarded areas
Improper use of this product may result in injury or death.
If you’re ordering from outside the U.S., your country may apply customs duties or import fees once the package arrives. These charges are not included at checkout.
Because of the size of these pieces, UPS is generally the most reliable options for international delivery.
Every Darkwater tail is carefully handmade and inspected before shipment. If you experience a manufacturing defect or issue related to craftsmanship, please contact us and we will gladly work with you to find a solution.
Customer satisfaction and the quality of our tails are extremely important to us.
These tails are produced as part of a set release and are not offered with custom alterations.
Each one is handmade, and slight variation is part of the process.
